66 lines
2.3 KiB
Groff
66 lines
2.3 KiB
Groff
.TH "FSP ENVIRONMENT" 7 "Dec 2004" FSP "FSP Environment Variables"
|
|
.SH NAME
|
|
Environment variables used by FSP Clients programs
|
|
.SH SYNOPSIS
|
|
setenv VARIABLE value | export VARIABLE=value
|
|
.SH ENVIRONMENT
|
|
.LP
|
|
The following variables are used for access FSP servers:
|
|
.TP
|
|
.B FSP_HOST
|
|
The name or internet number of the machine with the FSP server. Required.
|
|
.TP
|
|
.B FSP_PORT
|
|
The port number of the UDP socket used by the FSP server. Required.
|
|
.TP
|
|
.B FSP_LOCALIP
|
|
Local Address of UDP socket used by FSP client utilities. This
|
|
IP address must be one of your local IP addresses. If not used,
|
|
TCP protocol stack sets the default. This variable is mainly
|
|
used for multi-homed hosts.
|
|
.TP
|
|
.B FSP_LOCALPORT
|
|
The port number of the UDP socket used by FSP client utilities.
|
|
The only reason to define this variable is to ensure mutual
|
|
exclusion of client commands when none of the udp packet
|
|
multiplexing mechanisms are enabled during compile time.
|
|
You may pick any number not currently used for other purposes.
|
|
.TP
|
|
.B FSP_PASSWORD
|
|
Access password for FSP server. Directories on FSP server can be
|
|
password protected. FSP server can change your access level if you have
|
|
provided a correct password. There are 2 access levels: public and owner.
|
|
.TP
|
|
.B FSP_BUF_SIZE
|
|
Prefered size of server reply. Default is 1024 which is also maximum
|
|
allowed value by all servers. Some servers can accept larger packets and
|
|
you will get some extra speed with them.
|
|
You can lower that value if you want to get smaller
|
|
packets from server.
|
|
.TP
|
|
.B FSP_DIR
|
|
The current working directory of the client in the FSP server.
|
|
The server's root is /.
|
|
.TP
|
|
.B FSP_TRACE
|
|
If this variable is set to any value, program
|
|
will display the number of kilo-byte blocks transferred as transfer
|
|
progresses. Also shown will be a measure of characters per second
|
|
so that network speed has an indicator. This variable has no effect when the
|
|
standard output is a terminal.
|
|
.TP
|
|
.B FSP_TIMEOUT
|
|
If this variable is set, it contains the timeout value in seconds.
|
|
The default value is 360.
|
|
No function if program was compiled without timeout code.
|
|
.TP
|
|
.B FSP_DELAY
|
|
Minimum wait time before resending packet in milliseconds. This should
|
|
be set close to expected round trip time.
|
|
.TP
|
|
.B FSP_MAXDELAY
|
|
Maximum wait time before resending packet in milliseconds.
|
|
.TP
|
|
.B FSP_LOCAL_DIR
|
|
Where to look for local files. Default is current directory.
|